Key takeaways
- Build every commercial quote in four steps: measure glass and access, estimate time on site, apply your target hourly rate, then check the job against your round.
- Match the pricing model to the job: per-pane for small shops, per-hour for one-off cleans, fixed contracts for regular fortnightly or weekly work.
- A commercial quote should state scope, frequency, access method, exclusions, payment terms and a 12-month review date.
- Post-construction cleans can run four to six times your normal rate per window, so never quote them at your round rate.
- A contract at 10-15% under your one-off rate can still beat one-off work on margin because survey and travel costs spread across 26 or 52 visits.
Commercial jobs pay differently from a domestic round, and the usual prices for window cleaning you see quoted online won't tell you what to charge a shop-front or an office block. You build the quote from access, frequency, panes and your own hourly cost, then pick per-pane, per-hour or a contract to suit the job. This guide walks through each step, with a full worked quote showing the arithmetic line by line.
How do you price a commercial window cleaning job in the UK?
Work it in four steps: measure the glass and access, estimate time on site, apply your target hourly rate, then sanity-check the number against frequency and travel. Most underpriced commercial jobs fail at step one or step four.
Step 1: count panes and note access
Walk the site and count panes by size, not by window. Note anything that slows you down: signs, internal glass, doors that need two people, poles that will not reach the top run, and whether you can work during opening hours. A shop with 12 reachable panes and a three-storey office with 40 are different jobs even if the square footage looks similar.
Step 2: work out time on site
Estimate minutes per pane from your own domestic round experience, then add access time: setting up, moving ladders, packing down. A first clean on a dirty building takes longer than a maintenance clean, so quote the first clean separately or price it in.
Step 3: apply your target hourly rate
Take the hourly rate you actually earn on your round, not a hopeful figure. If your round clears £30 an hour and the commercial job works out at 90 minutes, the floor is £45 before you add travel. For context on what UK cleaners charge, Checkatrade's cost guide puts typical window cleaning rates at roughly £15-£25 per hour for domestic work (window cleaning cost guide). Commercial work should sit at or above your round rate, because you are giving up a spare day or moving round stops to fit it in. If the maths says £40 but your gut says £60, the gut is usually covering something the maths missed: awkward access, a fussy site contact, or a job you will dread every four weeks.
Step 4: check the job against your round
Ask where it fits. A fortnightly shop on your patch slots into a start day easily; a one-off clean 40 minutes away eats a washout you could spend moving remaining stops. The same logic applies to pricing add-ons like gutters, which we cover separately in our gutter cleaning pricing guide.
Per-pane, per-hour or per-contract: which pricing model fits which commercial job?
Pick the model to match the job, not the other way round. The table below shows which model suits which work and the trap each one carries.
| Model | Suits | Main risk |
|---|---|---|
| Per-pane | Small shops, low-rise offices | You lose money on big, grimy panes |
| Per-hour | One-off cleans, first visits | Client watches the clock and argues |
| Fixed contract | Regular weekly or fortnightly work | You underprice access problems |
Per-pane pricing
Count the panes, set a rate per pane, quote from the count. It works well for shopfronts and small offices where the count is easy and the glass is standard. The risk: a large or heavily soiled pane takes far longer than a small one, so a flat per-pane rate punishes you on the awkward jobs.
Per-hour pricing
Quote your hourly rate and bill the time. Best for one-off cleans and first visits where you cannot see the work until you start. The risk: the client has no fixed figure to sign off, and slow jobs become arguments about speed rather than scope.
Fixed contract pricing
One monthly or per-visit figure for a set schedule. Best for regular commercial work you can plan around your domestic round, the same way you price the domestic side (see our guide on how to price a round: domestic cleaning). The risk: if you miss an access problem, a ladder ban or a conservatory of glass, the contract price eats your spare day.
What should a commercial window cleaning quote include?
A commercial quote is a one-page agreement, not a number on a card. It needs six things: scope of work, frequency, access method, exclusions, payment terms and a review date. Miss one and you are arguing about it on the day.
Scope and exclusions
State exactly what you clean: internal and external glass, how often, and by what method (pure water, squeegee, reach-and-wash). Name the access: ladder, pole, or a specific height limit. Exclusions matter just as much — list what the price does not cover, such as frames, signage, gutters, or paint and mortar removal. If a builder has been in, that is a separate job at a separate price.
Payment terms and review dates
Agree payment terms in writing: 14 or 30 days, bank transfer or Direct Debit. Remember that once your turnover passes the VAT registration threshold you must charge VAT on commercial work — HMRC sets out the current threshold and rules. Add a review date, typically 12 months, so a price rise is expected rather than a row.
Quote it once and store the terms somewhere you will find them — the commercial jobs on WorkWise sit alongside your round, so every agreement is one tap away.
How do post-construction window cleaning prices differ from regular cleans?
Why the rate is higher
A new build or renovation leaves panes covered in paint flecks, mortar splashes, plaster dust and stickers, none of which come off with a scrubber and a squeegee. Blades, scrapers and solvent take time per pane, often three to five times a maintenance clean, and you are working around other trades' deadlines. Add skip costs or tip runs for debris and broken glass, plus the risk of scratching glass if the builders used cheap blades. That is why a post-construction clean can run four to six times your normal rate per window.
Quoting post-construction work without getting burned
Never quote these per pane at your round rate. Walk the site, count panes, check for cement and stickers, and price per pane at a builder's-clean rate or quote the day rate you want and work back. Put payment terms in writing and get the builder to confirm in an email before you start. Log the job and the agreed price in your round plan (https://joinworkwise.com/rounds/plan) so the paperwork matches what you quoted.
How do you price recurring commercial contracts vs one-off jobs?
A one-off clean carries the full cost of the site visit: the survey, the quote, the risk assessment, the drive. Spread that across 26 or 52 visits and the same job gets cheaper per clean, which is why a contract at 10-15% under your one-off rate can still beat a one-off on margin. Work out the annual value first, then check the monthly figure still covers your round on a bad week.
Annualising the contract
Multiply the per-visit price by visits per year before you agree anything. A £60 monthly clean looks small next to a £150 one-off, but it is £720 a year of guaranteed work in a fixed patch, and it fills the spare day a washout would otherwise leave empty. Log each contract in your round book alongside the domestic stops so you can see the true yearly picture: https://joinworkwise.com/rounds/books.
Review clauses and notice periods
Build in a price review every 12 months and require one or three months' written notice from either side. Without a notice period, a customer can drop you the week after you have priced the year around their stops. Check HSE guidance on working at height before quoting sites needing poles or access equipment, since access rules can change your cost between the survey and the first clean.
What factors push commercial window cleaning prices up or down?
Access is the biggest swing. Ground-floor squeegee work quotes one way; anything needing a pole system above two storeys, or a hire lift, adds real cost per visit.
Frequency cuts the rate. A monthly clean gets cheaper per visit than a quarterly one, because you're not re-quoting and re-learning the building each time.
Glass condition matters on first cleans. Neglected glass with cement, paint or years of grime can double the time of a first visit, so quote the first clean separately and put the ongoing price on its own line.
Travel and timing add up. A job an hour up the motorway needs the spare day costed in, and night or weekend work usually carries a premium since it's your time off.
Water supply is the last check: who fills the tanks, and who pays for it.
How do UK commercial rates compare to domestic round pricing?
A commercial clean per visit often looks worse than a domestic stop. A £12 house on your round takes 15 minutes; an office block might come back at £60 a clean for half a day's work including travel. The per-clean number is lower per hour, so it feels like a bad trade.
The difference shows up over a year. A commercial contract runs 26 or 52 cleans regardless of weather, and it lands on the same day every time. Domestic rounds shed work to washouts, holidays and houses sold mid-round, and chasing who owes me across 60 stops eats evenings. Domestic work also carries the post-construction risk: a one-off after builders have been in can triple your time on site, which is why many round traders leave those jobs alone.
The practical answer for a solo trader is to keep the domestic round as your base and treat commercial work as filler for spare days, priced per hour so you cannot underprice it. If a contract needs a full day you do not have, it costs you round stops elsewhere.
Run the round on WorkWise from £35 a month (founding offer £17.50 for 2 months at joinworkwise.com/pricing), with Lily handling pay links and moving remaining stops when a washout hits. No cut of jobs, no fee on payments.
How do you run commercial jobs alongside a domestic round without losing money?
Scheduling around the round
Commercial work pays less per clean but in bigger blocks, so it belongs on your spare day or at the start of the day before the round begins. Quote contracts by the hour with a minimum, then slot them where a washout or a quiet patch leaves a gap. If a job needs a specific weekday, move the remaining domestic stops around it rather than squeezing both. One badly slotted contract can cost you six round stops, so price the travel and the disruption into the quote, not just the glass.
Getting paid on commercial terms
Commercial customers expect 30-day invoices, so keep a simple who owes me list and chase at 14 days with a pay link rather than waiting to month end. Direct Debit or Pay by Bank beats chasing cheques. The margin is thin enough that per-job fees and commission cuts hurt twice, which is why WorkWise runs at a flat £35 a month with no cut of jobs and no fee on payments, with Lily handling the admin. See joinworkwise.com/pricing; the founding offer is £17.50 for 2 months.
FAQ
How much do commercial window cleaners charge per window in the UK?
There is no fixed national figure. Small shopfront panes might go for a few pounds each, while large or heavily soiled panes can cost several times more. Because pane size and access vary so much, most cleaners work backwards from their target hourly rate and the estimated time on site rather than quoting a flat per-window price.
What is the going rate for commercial window cleaning per hour?
Aim at or above the hourly rate your domestic round actually earns. If your round clears £30 an hour, that is your floor for commercial work, before travel and access time. Domestic rates typically run £15-£25 an hour, but commercial jobs involve more setup, access problems and admin, so quoting below your round rate means losing money.
Do commercial window cleaners charge VAT?
Yes, once your turnover passes the VAT registration threshold you must charge VAT on commercial work, so build it into the quote or state it separately. Business customers usually expect 30-day payment terms, so agree terms in writing and note whether you will invoice by bank transfer or Direct Debit before the first clean.
How do I quote a shop front for window cleaning?
Walk the site and count panes by size, noting access problems like signage or doors needing two people. Estimate minutes per pane from your own experience, add setup and pack-down time, then apply your hourly rate. Price the first clean separately if the glass is dirty, and state frequency, method and exclusions on the quote.
Is commercial window cleaning worth it for a small round?
Yes, if it fills spare days rather than displacing round stops. A contract at 10-15% under your one-off rate can still beat one-off work on margin because the survey and travel costs spread across 26 or 52 visits. Keep the domestic round as your base, price commercial jobs by the hour with a minimum, and review prices annually.